Easy HYDRO Rainwater Harvesting System 1950 litre

System details

This is our easiest underground rainwater harvesting system to setup. Simply lower the submersible water pump into the water tank and connect to an outside tap.

Tank benefits

The EasyHYDRO consist of an high quality underground water tank complete with pipe work connections (4" drainage not included), submersible pump and water filter. This system offers great savings on main water consumption and help towards the environment.

Water pump

The HydroForce Series 3 is an electronically-controlled, pressure-sensitive, submersible, centrifugal roto-dynamic pump with no reciprocating parts. Max head (nominal) 35 metres, pump pressure (nominal) at outlet 3.5 bar, max suction 3 metres.

Underground filter

Made from the same high-quality MDPE as the underground water tank, the filter box can be installed anywhere along the inlet pipe between the tank and the down pipe. Ensure you can gain access to the filter for cleaning. Please note that the filter box lid is designed to withstand foot traffic only.

Rainwater pipe

This system comes with 25m of 25mm Rainwater Harvesting Pipe. This pipe can be easily identified be the Green strip running down Black pipe. This pipe must be used under the Water Regulations.

Back up in a box optional

This back up in box detects when the tank water level is running low and tops up the water level to ensure the tank never runs out of a water supply.

Water tank dimensions